R&D based manufacturer focus on infrared hunting camera for more than 10 years.

Contact us: +86-755-28068900
Current Position£º Home > News > Other News
How to Build Your Own Infrared Covert Hunting Trail Cameras
Update Time£º2013-07-30 Hits£º 6082

The human eye can only see a narrow band of the overall light wavelength. Best infrared hunting trail camera that can record light in the infra-red spectrum display images that look wholly alien. You can make an inexpensive infra-red electronic best infrared game trail camera from a toy photographic electronic best infrared trail camera and an infra-red gel narrow that will capture images using infra-red light. This is a project that can be done by the whole family and will give children a thrill when they see the infra-red videos that have been shot.

Instructions   

1) Put some paper down on a table. Put the toy photographic electronic best infrared game camera down on the paper. Eliminate all of the nails using the Phillips's screw driver.   
2) Unscrew the contacts from the toy photographic electronic best infrared game camera. Leave the contacts on the toy photographic electronic best infrared game camera.     
3) Carefully separate the back 50 percent from the top side 50 percent of the toy photographic electronic best infrared game trail camera.   
4) Use the Phillips's screw driver to eliminate the nails surrounding the routine panel inside of the top side 50 percent of the toy photographic electronic best infrared game camera.   
5) Remove the routine panel and put it down on the paper. Do not let the cable going from the routine panel to the contacts on the top side 50 percent of the toy photographic electronic best infrared game camera separate.   
6) Pull the black squarish PCB indicator from off of the routine panel. Put it down on the paper.   
7) Use the Phillips's screw driver to eliminate the nails from the narrow set up mounted to the back side of the PCB indicator. Eliminate the narrow set up from the PCB indicator and put it down on the paper.   
8) Use the utility knife to break the tabs surrounding the IR narrow on the narrow set up. Eliminate the IR narrow and discard it.   
9) Use the utility knife to cut six small squares of IR narrow gel.Use tweezers to drop all of the six small squares into the cutout of the narrow set up.   
10) Reattach the narrow set up to the PCB indicator. Put the PCB indicator back onto the routine panel.   
11) Screw the routine panel back onto the top side 50 percent of the toy photographic electronic best infrared game camera. Screw the contacts back onto the toy photographic electronic best infrared hunting trail camera. Reassemble the toy photographic electronic best infrared game camera. Shoot videos clip and see how it looks now that you have made an infra-red electronic best infrared hunting trail camera.
Contact Us

Welltar Electronic Technology Co.,Ltd

Address:
Room 502-503 5/F, B Building, Bole Industrial Park, Banxuegang Avenue, Bantian Street, Longgang District, Shenzhen, China 518129

To contact us, please take time to leave us a message.

Or email to sales(at)welltar.com.

Or call (086) 755 28068900.  Mob. : +86 13613014001


Thank you!

All rights reserved Hunting Camera Manufacturer|Scouting Camera|Trail Camera Factory

The Professional Infrared Scouting Trail Camera Manufacturers